Advanced UV Treatment for Blow Out Preventer (B.O.P.) Control & Operation Hydraulic Fluids fluids
atg UV Technology have successfully completed pilot trials to prove the effectiveness of UV disinfection in treating hydraulic fluids used for subsea B.O.P. (Blow Out Preventer) control and operation.
UV light is a chemical-free, physical disinfection technique that is widely used throughout the offshore sector for applications such as potable water disinfection, RO membrane protection and for the reduction of Sulphate Reducing Bacteria (SRB’s) from well injection fluids and produced water.
Blowout Preventers (B.O.P.) are critical safety devices used to prevent the uncontrolled flow of liquids and gases during drilling operations. Typically, B.O.P’s are controlled and operated by hydraulic fluids comprised of: -
If left untreated, the levels of bacteria present in the BOP Controls fluid can quickly begin to rise. This growth is quickly accelerated by the sugars present in the glycol mixture. Bacterial growth is now a hot topic with operators, as even small amounts of biological activity can lead to a range of negative consequences including; microbial corrosion on the fluid lines, corrosion of the B.O.P. and Control Unit components and seals and control system blockages caused by the formation of particles and solids in the fluid. These can lead to critical B.O.P. failure and unrepairable damage of the Blow Out Preventer itself.
Unlike standard water treatment applications that use UV disinfection to control bacterial growth such as drinking water, the treatment of B.O.P. fluid using UV is a highly specialised application. This requires advanced engineering to overcome the barriers regarding UV dose delivery into the B.O.P. fluid, which typically features an extremely low UV Transmittance (UVT) of nearly 0% (standard UV systems are not effective below 30% UVT). In addition, the design of the UV solution needs to avoid the possibility of caramelising and burning the sugars present in the Glycol based additives.
Working with a number of specialist subsea B.O.P. controls specialists, atg UV Technology have designed a unique treatment solution that combines UV treatment and filtration. A key aspect of the design was to establish the optimum treatment rate in order to overcome the many disinfection barriers associated with B.O.P. fluid. A number of lab and pilot trials were undertaken at atg UV Technology’s facility in Wigan, to fine tune the design and prove the effectiveness of UV light as a sterilization technique for the mixed hydraulic operation fluid.
“With review of a year’s fluid analysis results the tanks that feed the B.O.P. fluid mix tank with fresh water, glycol and soluble oil are all showing levels of bacterial growth and notable particle contamination. However, the mix tank which features the UV treatment package is showing undetectable results in both bacteria and solid particle counts. This demonstrates that the filtration and UV disinfection solution is achieving as near perfect result as you can get”
Technical Manager, Raisepower Subsea Control Solutions
atg UV Technology are the only UV manufacturer in the world to offer a fully tested and field proven B.O.P. control fluid UV treatment package, Following the success of this original research, atg UV Technology have installed a number of fully operational, ATEX Zone 2, IIB, T3 certified UV treatment, filtration and pumping skid packages for the operators such as Transocean and Awilco Drilling.
For further information on how UV treatment can significantly improve the quality of your hydraulic operation fluids and protect your B.O.P. unit from failure, please contact atg UV Technology on +44(0)1942 216161.